Product Details:
|
Properties: | Injection & Puncture Instrument | Material: | 304ssl |
---|---|---|---|
Instrument Classification: | Class III | Product Model: | Y Positive Pressure Type |
Specification 1: | 20G*1.16IN | Specification 2: | 1.1*30mm |
Flow Rate: | 50ml/min | Clinical Applications: | Emergency Infusion/Blood Transfusion |
Color: | Pink | Shelf Life: | 5 Years |
High Light: | disposable 20g iv catheter,y type 20g iv catheter,emergency pink iv catheter |
The Y Type disposable intravenous indwelling needle is divided into two types, Y-B and Y-BZ
Instructions for use:
1. medical personnel should check the package strictly according to aseptic operation, and remove the product if it is well sealed and not broken;
2. tighten the heparin cap (if any), remove the protective cap and connect directly to the outer luer connector to drain the gas;
3. medical personnel rotate and loosen the needle tip protection sleeve, pinch the catheter holder with one hand, turn the needle handle slightly from side to side with the other hand, and then reset it to prevent needle adhesion;
4. hold the needle holder flap so that the syringe blade is facing upward at an angle of 15-30 degrees, puncture the vein straight and feed the needle slowly;
5. carefully observe the return of blood at the lateral hole of the needle core, depress the angle after seeing the return of blood, continue to enter the needle for 2 mm, hold the catheter holder in the left hand and withdraw the steel core about 5 mm with the right hand;
6. Hold the needle holder and feed the steel needle core and catheter together all into the vessel, and withdraw the steel needle core. Do not re-insert the steel needle into the catheter to avoid damage to the catheter. Put the withdrawn steel needle into the special apparatus;
7. Adjust the infusion flow rate by applying a transparent dressing;
8. After the indwelling infusion is finished, the tube should be sealed.
Please see the following table for details
Type | Product Specifications | Flow Rate | Clinical Applications | Color | |
Y-B(Y type)
|
26G*0.63IN | 0.6*16mm | 10ml/min | Neonates and fine vessels | Purple |
26G*0.75IN | 0.6*19mm | ||||
24G*0.75IN | 0.7*19mm | 19ml/min | Pediatrics/Neonatal Infusion | Yellow | |
22G*0.75IN | 0.9*19mm | 33ml/min | Routine infusion for adults | Blue | |
22G*1.00IN | 0.9*25mm | ||||
20G*1.16IN | 1.1*30mm | 50ml/min | Emergency infusion/blood transfusion | Pink | |
18G*1.16IN | 1.3*30mm | 70ml/min | Emergency Surgery | Green |
Perfect plasticity of the catheter tip, precise and stable distance, can improve the success rate of puncture and safe placement.
Multi-bevel design for sharper punctures and less patient pain
Airtight integrated design to avoid blood contamination
Take care of your blood vessels.
Instructions for product use:
This product should be used by professionals, and healthcare professionals using this product should be trained in venipuncture techniques and be aware of the potential hazards involved. It should be used using aseptic technique, properly disinfecting the skin and keeping the puncture site clean.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Q: Where is your factory located? How can I visit there?
A: Our factory is in Wuzhong District, Suzhou City, Jiangsu Province, and all our customers, both domestic and foreign, are warmly welcome to visit our factory
Q: Are you a factory or a trading company?
A: We are a large factory integrating R&D, production and sales.
Q: When can I get the price?
A: Normally, we quote within 24 hours after we receive your inquiry.
Q: Can you do OEM?
A: Yes, we do OEM, ODM and R&D. We can process products according to the different needs of our customers.
Q: What is the delivery time?
A: According to the order quantity, it needs to be negotiated.
Q:If I want to order a small quantity, can you do it?
A: If you need products that we have in stock, that would be great and you can choose goods that are in stock.We can put your order together with our other customers' orders for production. But this will require some waiting time.
Q:How will you track my order?
A:When the goods start production, we will take photos of the goods and send them to you, if you find any production,defects, please contact us to correct it. Throughout the production process, we will keep in touch with you via email or instantinformation and you can get the latest news about your order. After the goods are completed, we will take pictures of the goods and pack
to you before shipping.
Q: How can I get a sample?
A: Please pay the sample cost and courier fee before we receive your first order. We will return the sample cost to you on your first order.
Q: Can you brand the products with our brand?
A: Some products can. We can put your Logo on the products and packaging if you can meet our MOQ.
Q: Can you make products in our colors?
A: Yes, the color of the product can be customized if you can meet our MOQ.
Q: How do you guarantee the quality of your products?
A:
1) Strict testing during the production process.
2) Strict sampling inspection of products before shipment, and make sure the products are well packed.
Contact Person: Beryl Pu
Tel: yuanhuapu@gmail.com